Remotely Access an iOS Device from a Windows Computer Using VNC

This will show you how to remote control Windows computers with Android devices.

Set Up iOS for Being Controlled

You have to be jailbroken for this to work. There is no way around this.

Navigate to Cydia and download the Veency package. You don’t have to add any repositories.

Veency On Cydia

After you install it, go to Settings and scroll down until you see the preference pane. It should be with all of the other tweaks.

Veency In Settings

Check enabled if not already, use your personal preference for show cursor, and set a password. A password is needed to connect to this iOS device unattended. I just use “1” for my password.

Veency Configuration

Go back in your Settings to WiFi and click the information icon on the network you are connected to.

WiFi Connect Settings

Make note of your IP address. This will be important for connecting to the device next via a VNC viewer.

WiFi Info

This is device number 19, so its IP ends in 19 per my naming system. To make this IP static, you will have to research how to do DHCP reservations or static IP within your router. Every router is different.


Set Up Windows for Controlling

Make sure your windows computer is on the same network as the device you are controlling – more on connecting outside the network below.

Download VNC Viewer for Windows here.

Once installed and opened, configure the preferences. Go to your toolbar and navigate to preferences for VNC Viewer:

Preferences Windows VNC Viewer

Go to the expert tab.

Expert Tab Windows VNC Viewer

Search or find ColorLevel and set to rgb222 for a balance between speed and visibility:

Color Settings Windows VNC Viewer

Search WarnUnencrypted and set to false.

Warn Unencrypted Windows VNC Viewer

Search Quality and set to custom.

Set Quality Windows VNC Viewer

Apply changes and close. These settings will now be used for all connections made and saved on this computer.
Those are basic parameters I always change. You may want to change other things such as default scaling in that menu.

Now simply connect to do the device. Enter its IP address from above into the search bar and click enter (e.g. device 19 has IP ending in 19).
Enter the password and check remember password.

Enter Password Windows VNC Viewer

You are now connected!
At this point, rename the connection. Close out and find it in the address book.

Click on it and click Ctrl+I to pull up properties (or right click).

Properties Click Windows VNC Viewer

Put in a friendly name below the IP address (e.g. 19 for device #19).
I usually name mine according to my cash device naming system.

Connection Settings Windows VNC Viewer

I also export my connections. Click file in the toolbar, export connections. This exports everything so if you have more devices, you might as well set those up first.

Export Connections Windows VNC Viewer

I recommend exporting these VNC files to a Dropbox or Google Drive folder so you can use them on other computers.

Controlling from Outside Your Network

In order to control this device from outside the network, I recommend setting up a VPN on your router. You can then use the same IP address you used above to connect to the machine as long as you are connected to your router via the VPN on the device controlling.
I will have an example soon on how I set up a VPN with my router, but how you can set up a VPN on your router depends on your model. Every UI is different. You will have to research your model for how to set up a VPN on it.